Qaybaha Badeecadaha

Alaabooyinka La Soo Bandhigay

Qabanqaabiyeyaasha FHFY iyo FHFZ

Motherboard-ka Guddiga Wareegga Xakamaynta Caqliga leh (Boiler)

Guddiga Wareegga Xakamaynta Caqliga leh ee Motherboard-ka...

Golaha Guddiga Wareegga Daadinta Heerka FUS

Nooca B ee Haraaga ah ee Qalabka Jabiyaha Wareegga ee Hadda La Shaqeeyo

Nooca B ee Haraaga ah ee Wareegga Hawlgalka ee Hadda...

Foorno yar oo ah nooca FMl ah oo aan lahayn bir

Taxanaha FMHS4 ee Isbarbar-dhigga ah Nooca Furan ee Xidhan ee Pneumatic Claw/4-Claw

Taxanaha FMHS4 ee Isbarbar socda ee Furan-Xidh Nooca Pneumatic...

Shaxda Slide-ka ee Taxanaha FMXS

Ku habboonaanta Degdegga ah ee Nooca C (Jidhka Naxaasta ah)

1. Silsilad khafiif ah oo taxane ah oo leh Tusmada Tilmaamaha.jpg

Taxanaha FMGP ee khafiifka ah oo leh Usha Hagaha

· Usha hagaha waa la gaabiyay waxaana la beddelay dhumucda saxanka hore, taasoo hoos u dhigaysa miisaanka ilaa 24%.
· Usha hagaha ee badbaadinaysa booska ayaa la soo gaabiyay ilaa 22mm, taasoo yaraynaysa xaddiga mashiinka godadka ka fogaanshaha inta lagu jiro rakibidda dhululubada.
· badhanka birlabta wareegsan, badhanka birlabta xooggan ayaa si toos ah loogu rakibi karaa, looma baahna qaybin.

Nala soo xiriir

faahfaahinta alaabta

Calaamadaha

Koodhka Dalabka Badeecada ee Dhammaystiran

Koodhka dalabka badeecada ee la dhammeeyay

[Fiiro gaar ah]: Kuwa leh dhexroorka dhululubada 12 iyo 16 waxay leeyihiin M5x0.8 oo keliya.

Tilmaamaha

Dhexroorka Gudaha (mm)		12	16	20	25	32	40	50	63	80	100
Habka hawlgalka		Nooca Laba-Jilid
Dhexdhexaad shaqeynaya		Hawada (lagu sifeeyay iyada oo loo marayo Shaandheeyaha oo leh cabbir dalool ka yar 40μm)
Kala duwanaanshaha cadaadiska hawlgalka		0.1~1.0MPa(22~145psi)
Iska caabinta cadaadiska ee la hubo		1.5Mpa (215psi)
Heerkulka Hawlgalka		- 10 ~ 60℃
Kala duwanaanshaha xawaaraha hawlgalka		50 ~ 500mm/s								50 ~ 400mm/s
Kala duwanaanshaha Dulqaadka Dhimirka		≤100 >100
Nooca barkinta		Suufka bamper-ka
Saxnaanta Wareegga ee Aan - ahayn [Fiiro gaar ah 1]	Biirka Toosan	±0.08°		±0.07°		±0.06°		±0.05°		±0.04°
	Gacanta naxaasta ah	±0.1°		±0.09°		±0.09°		±0.06°		±0.05°
Dhererka tuubada [Fiiro gaar ah 2]		M5X0. 8		PT1/8				PT1/4		PT3/8

[Fiiro gaar ah 1] Saxnaanta aan wareegga ahayn waxay tilmaamaysaa xagasha uu saxanka silinda hagaajinaya uu wareegi karo marka silinda si buuxda dib loogu celiyo.

[Fiiro gaar ah 2] PT Thread, G Thread iyo NPT Thread ayaa diyaar u ah tubbada.

Stroke

Dhexroorka dhululubada (mm)	istaroog caadi ah (mm)
12 16	10 20 30 40 50 75 100 125 150 175 200 250
20 25	20 30 40 50 75 100 125 150 175 200 250 300 350 400
32 40 50 63 80 100	25 50 75 100 125 150 175 200 250 300 350 400

Ku habboon Beddelka Birlabta

Nooca

Tilmaamaha Gaarka ah

Fiilo Fiilo ah

Tilmaame

Fiilooyinka (Wax soo saarka)

Danabka Xamuulka

Qaabka Beddelka Birlabta

Dhererka Silig (m)

Fiilada Hore ee Silig

Rarka ku habboon

IYO

Soo saarista Joogtada ah

Rakaabka Kala-baxa ee Transverse

0.5 (Calaamad la'aan)

1(M)

3 (L)

5(Z)

Beddelaha Birlabta ee aan Xidhiidh lahayn

Silig toos ah

Haa

3-Silig (NPN)

24V

5V, 12V

M9NV

M9N

●

○

Wareegga IC

Relay.PLC

3-Silig (PNP)

M9PV

M9P

●

○

2-Silig

12V

M9BV

M9B

●

○

Bandhigga Baadhista (Shaashada 2-Midab)

3-Silig (NPN)

5V, 12V

M9NWV

M9NW

●

○

Wareegga IC

3-Silig (PNP)

M9PWV

M9PW

●

○

2-Silig

12V

M9BWV

M9BW

●

○

Biyaha oo aad u adkaysta (Shaashada 2-Midab)

3-Silig (NPN)

5V, 12V

※1M9NAV

※1M9NA

○

●

○

Wareegga IC

3-Silig (PNP)

※1M9PAV

※1M9PA

○

●

○

2-Silig

12V

※1M9BAV

※1M9BA

○

●

○

Iska caabinta Goobta Birlab-la'aanta ah ee Xooggan (Shaashada 2-Midab)

2-Silig(Ma jiro Polarity

※※P3DWA

●

○

Iyada oo la adeegsanayo Badhanka Birlabta ee Xiriirka

Silig toos ah

Haa

3-Silig (U dhiganta NPN)

A96V

A96

●

Wareegga IC

2-Silig

24V

12V

100V

※2A93V

A93

●

Relay.PLC

Midna ma jiro

Ka hooseeya 100V

A90V

A90

●

Wareegga IC

※ Badhanka birlabta ee xoogga leh ee biyaha u adkaysta waxaa lagu rakibi karaa moodooyinka kor ku xusan, laakiin iska caabbinta biyaha guud ee badeecaddu lama dammaanad qaadi karo. Marka loo isticmaalo jawi biyaha u adkaysta waxaa lagu talinayaa in la isticmaalo badeeco biyo u adkaysta oo xooggan, Si kastaba ha ahaatee, alaabada biyaha u adkaysta ee dhexdhexaadka ah ee dhexdhexaadka ah ee dhexdhexaadka ah 12 dhexdhexaadka ah 16 fadlan la tasho shirkaddayada.

※ Nooca dhererka siligga 1m wuxuu u dhigmaa oo keliya D-A93.

※Dhererka siligga calaamadda 0.5... Calaamad ma jirto (Tusaale) M9NW

1m......M(Tusaale)M9NWM

3m......L(Tusaale) M9NWL

5m......Z(Tusaale) M9NWZ

※※ Badhanka birlabta ah ee aan taabashada lahayn oo leh astaanta O waxaa loo soo saaraa sida waafaqsan nidaamka.

※※ Nooca dekedda D-P3DWA wuxuu u dhigmaa dhexroorka dhululubada ee dhexdhexaadka ah 25~dhexe 100.

※ Marka laga soo tago moodooyinka kor ku xusan, waxaa jira beddello kale oo birlab ah oo ku habboon.

※ Badhanka birlabta ah waxaa la socda baakadka (aan la isku darin)

Qaab-dhismeedka Gudaha iyo Qalabka Qaybaha Ugu Muhiimsan

MAYA.	Magaca Qaybta	Alaab	MAYA.	Magaca Qaybta	Alaab
1	Jidh	Aluminium Daawaha	13	Barkinta Barkinta B	Polyurethane
2	Bistoon	Aluminium Daawaha	14	Giraangiraha Birlabta ah	-
3	Piston Rod	Bir aan Daxal lahayn	15	Furaha Furaha	Bir Kaarboon ah
3	Piston Rod	Bir Kaarboon ah	15	Kubbadda Fiilada ee Hex Socket	Bir Kaarboon ah
4	Giraan	Aluminium Daawaha	16	Sitaar simbiriirixan	Daawaha dhalista
5	Daboolka Silsiladda ee No Rod Sid	Aluminium Daawaha	17	Kubadda Kubadda
6	Usha Hagaha	Bir Kaarboon ah	18	Qaybinta	Aluminium Daawaha
7	Taarikada Dhammaadka	Bir Kaarboon ah	19	Kubbad Bir ah	Bir Kaarboon ah
8	Ku xidhidda Daboolka Dhamaadka	Bir Kaarboon ah	20	Furaha	Bir Kaarboon ah
9	Ku marooji Usha Hagaha	Bir Kaarboon ah	21	Giraanta Shaabadda Baaskiillada	NBR
10	Jooji Faraantiga	Birta Qalabka Kaarboon	22	Ring Shaabad Usha ah	NBR
11	Jooji Faraantiga	Birta Qalabka Kaarboon	23	Giraanta Shaabadda A ee aan joogtada ahayn	NBR
12	Barkinta Barkinta A	Polyurethane	24	Giraanta Shaabadda B ee aan joogtada ahayn	NBR

Tilmaamaha Dibadda

[Fiiro gaar ah 1] Wixii ф12 ~ф25 oo leh 50 istaroog ama ka yar, fadlan tixraac Qaybta EE.

※Iyada oo ku saleysan godka biinka (qoto dheer XAH9 6), qaybta XX waxay isticmaashaa god dheer (ballaca XA, dhererka X, qoto dheer 3), kaas oo yareyn kara shuruudaha saxnaanta mishiinka ee u dhexeeya labada biin.

※Dhexdhexaadka dhululubada ф12, ф16 waxay leeyihiin oo keliya dekedaha M5x0.8, dhexroorka dhululubada dhexdhexaadka ah 20 ama ka sareeya ayaa dooran kara dekedaha Rc, NPT. G.

Dhexroorka Silsiladda (mm)	Istaroog Caadi ah (mm)	B	C	IYO	LAAKIIN	FB	G	KU	GB	H	HA	J	K	L	MM	ML	NN	O.A.	KU SAABSAN	OL	P
Dhexroorka Silsiladda (mm)	Istaroog Caadi ah (mm)	B	C	IYO	LAAKIIN	FB	G	KU	GB	H	HA	J	K	L	MM	ML	NN	O.A.	KU SAABSAN	OL	Calaamad La'aan	TN	TF
12	10,20/30,40,50,75/100,125,150,175,200,250	42	29	6	7	6	26	10	7	58	M4	13	13	18	M4x0.7	10	M4x0.7	4.3	8	4.5	M5x0.8	-	-
16	10,20/30,40,50,75/100,125,150,175,200,250	46	33	8	7	6	30	10.5	7.5	64	M4	15	15	22	M5x0.8	12	M5x0.8	4.3	8	4.5	M5x0.8	-	-
20	20,30,40,50,75,100,125,150,175,200,250,300,350,400	53	37	10	8	8	36	11.5	9	83	M5	18	18	24	M5x0.8	13	M5x0.8	5.4	9.5	5.5	Rc1/8	NPT1/8	G1/8
25	20,30,40,50,75,100,125,150,175,200,250,300,350,400	53.5	37.5	10	9	7	42	11.5	10	93	M5	21	21	30	M6x1.0	15	M6x1.0	5.4	9.5	5.5	Rc1/8	NPT1/8	G1/8

Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	OF					WB					X	SHAH	XB	Sannad	YL	IYO
Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	30aad ama ka yar	30aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	30aad ama ka yar	30aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	X	SHAH	XB	Sannad	YL	IYO
12	13	8	18	14	14	22	56	41	50	37	20	40	110	200	-	15	25	60	105	-	23	3	3.5	M5x0.8	10	5
16	14.5	10	19	16	16	25	62	46	56	38	24	44	110	200	-	17	27	60	105	-	24	3	3.5	M5x0.8	10	5
20	13.5	10.5	25	25	18	30	81	54	72	44	24	44	120	200	300	29	39	77	117	167	28	3	3.5	M6x1.0	12	17
25	12.5	13.5	30	30	26	38	91	64	82	50	24	44	120	200	300	29	39	77	117	167	34	4	4.5	M6x1.0	12	17

MGPM (Sliding scaling bearing)

Cabbirrada A, DB, E

Dhexroorka Dhululubada (mm)	A				DB	IYO
Dhexroorka Dhululubada (mm)	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo in ka yar 200aad	200aad ama ka yar	DB	Fiiro gaar ah 1) 50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka yar
12	42	60.5	82.5	82.5	8	0	18.5	40.5	40.5
16	46	64.5	92.5	92.5	10	0	18.5	46.5	46.5
20	53	77.5	77.5	110	12	0	24.5	24.5	57
25	53.5	77.5	77.5	109.5	16	0	24	24	56

MGPL (Kubadda Kubadda)

Cabbirrada A, DB, E

Dhexroorka Dhululubada (mm)	A				DB	IYO
Dhexroorka Dhululubada (mm)	30aad ama ka yar	30aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo in ka yar 200aad	200aad ama ka yar	DB	30aad ama ka yar	30aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo in ka yar 200aad	200aad ama ka yar
12	43	55	84.5	84.5	6	1	13	42.5	42.5
16	49	65	94.5	94.5	8	3	19	48.5	48.5
20	59	76	100	117.5	10	6	23	47	64.5
25	65.5	81.5	100.5	117.5	13	12	28	47	64

※Iyada oo ku saleysan godka biinka ($XAH9 qoto dheer XL), Qaybta XX waxay isticmaashaa god dheer (ballaca XA, dhererka XB, qoto dheer XC) si loo yareeyo shuruudaha saxnaanta mishiinka ee u dhexeeya labada biin.

※ Dekedaha Rc, NPT, iyo G waa la dooran karaa.

Dhexroorka Dhululubada (mm)	Istaroog Caadi ah (mm)	B	C	IYO	LAAKIIN	FB	G	KU	GB	H	HA	J	K	L	MM	ML	NN	O.A.	KU SAABSAN	OL	P
Dhexroorka Dhululubada (mm)	Istaroog Caadi ah (mm)	B	C	IYO	LAAKIIN	FB	G	KU	GB	H	HA	J	K	L	MM	ML	NN	O.A.	KU SAABSAN	OL	Calaamad La'aan	TN	TF
32	25,50,75,100,125,150,175,200,250,300,350,400	59.5	37.5	14	10	12	48	12	9	112	M6	24	24	34	M8x1.25	20	M8x1.25	6.7	11	7.5	Rc1/8	NPT1/8	G1/8
40		66	44	14	10	12	54	15	12	120	M6	27	27	40	M8x1.25	20	M8x1.25	6.7	11	7.5	Rc1/8	NPT1/8	G1/8
50		72	44	18	12	16	64	15	12	148	M8	32	32	46	M10x1.5	22	M10x1.5	8.6	14	9	Rc1/4	NPT1/4	G1/4
63		77	49	18	12	16	78	15.5	13.5	162	M10	39	39	58	M10x1.5	22	M10x1.5	8.6	-	9	Rc1/4	NPT1/4	G1/4

Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	OF					WB					X	SHAH	XB	XC	XL	Sannad	YL	IYO
Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	25aad ama ka yar	25aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	25aad ama ka yar	25aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	X	SHAH	XB	XC	XL	Sannad	YL	IYO
32	6.5	16	35.5	30	96	44	110	78	98	63	24	48	124	200	300	33	45	83	121	171	42	4	4.5	3	6	M8x1.25	16	21
40	13	18	39.5	30	104	44	118	86	106	72	24	48	124	200	300	34	46	84	122	172	50	4	4.5	3	6	M8x1.25	16	22
50	9	21.5	47	40	130	60	146	110	130	92	24	48	124	200	300	36	48	86	124	174	66	5	6	4	8	M10x1.5	20	24
63	13	28	58	50	130	70	158	124	142	110	28	52	128	200	300	38	50	88	124	174	80	5	6	4	8	M10x1.5	20	24

MGPM (Sliding scaling bearing)

Cabbirrada A, DB, E

Dhexroorka Silsiladda (mm)	A			DB	IYO
Dhexroorka Silsiladda (mm)	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan	DB	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan
32	75	93.5	129.5	20	15.5	34	70
40	75	93.5	129.5	20	9	27.5	63.5
50	88.5	109.5	150.5	25	16.5	37.5	78.5
63	88.5	109.5	150.5	25	11.5	32.5	73.5

MGPL (Kubadda Kubadda)

Cabbirrada A, DB, E

Dhexroorka Silsiladda (mm)	A				DB	IYO
Dhexroorka Silsiladda (mm)	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan	DB	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 100aad	100aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan
32	79.5	96.5	116.5	138.5	16	20	37	57	79
40	79.5	96.5	116.5	138.5	16	13.5	30.5	50.5	72.5
50	91.5	112.5	132.5	159.5	20	19.5	40.5	60.5	87.5
63	91.5	112.5	132.5	159.5	20	14.5	35.5	55.5	82.5

※ Iyada oo ku saleysan godka biinka (qoto dheer φ6H9 10), Qaybta XX waxay isticmaashaa god dheer (ballac X6, dherer 7, qoto dheer 5) si loo yareeyo shuruudaha saxnaanta mishiinka ee u dhexeeya labada biin.

※ Dekedaha Rc, NPT, iyo G waa la dooran karaa.

Dhexroorka Dhululubada (mm)	Istaroog Caadi ah (mm)	B	C	IYO	LAAKIIN	FB	G	KU	GB	H	HA	J	IYO	JB	JC	K	L	MM	ML	NN	O.A.	KU SAABSAN	OL	P
																								Calaamad La'aan	TN	TF
80	25.50.75.100.125.150.175200,250,300.350,400	96.5	56.5	22	16	24	91.5	19	16.5	202	M12	45.5	38	7.5	15	46	54	M12x1.75	25	M12x1.75	10.6	17.5	3	RC3/8	NPT3/8	G3/8
100		116	66	26	19	31	111.5	22.5	20.5	240	M14	55.5	45	10.5	10	56	62	M14x2.0	31	M14x2.0	12.5	20	8	RC3/8	NPT3/8	G3/8

Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	OF					WB					X	Sannad	YL	IYO
Dhexroorka Dhululubada (mm)	PA	PB	PW	Q	R	S	T	IN	IYO	VB	25aad ama ka yar	25aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	25aad ama ka yar	25aad ama ka badan 100aad ama ka yar	100aad ama ka badan 200aad ama ka yar	200aad ama ka badan 300aad ama ka yar	300aad ama ka yar	X	Sannad	YL	IYO
80	14.5	25.5	74	52	174	75	198	156	180	140	28	52	128	200	300	42	54	92	128	178	100	M12x1.75	24	28
100	17.5	32.5	89	64	210	90	236	188	210	166	48	72	148	200	320	35	47	85	121	171	124	M14x2.0	28	11

MGPM (Sliding scaling bearing)

Cabbirrada A, DB, E

Dhexroorka Silsiladda (mm)	A			DB	IYO
Dhexroorka Silsiladda (mm)	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan	DB	50aad ama ka yar	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan
80	104.5	131.5	180.5	30	8	35	84
100	126.5	151.5	190.5	36	10.5	35.5	74.5

MGPL (Xadhka Kubadda)

Cabbirrada A, DB, E

Dhexroorka Silsiladda (mm)	A				DB	IYO
Dhexroorka Silsiladda (mm)	25aad ama ka yar	25aad ama ka badan, iyo wax ka yar 50aad	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan	DB	25aad ama ka yar	25aad ama ka badan, iyo wax ka yar 50aad	50aad ama ka badan, iyo wax ka yar 200aad	200aad ama ka badan
80	104.5	128.5	158.5	191.5	25	8	32	62	95
100	119.5	145.5	178.5	201.5	30	3.5	29.5	62.5	85.5

Wareegga Loo Ogol yahay ee Saxanka Dhamaadka

Dhexroorka Silsiladda (mm)	Noocyada raadadka	Istaroog (mm)
Dhexroorka Silsiladda (mm)	Noocyada raadadka	10	20	25	30	40	50	75	100	125	150	175	200	250	300	350	400
Cutubka ugu badan ee la oggol yahay ee Wareegga: Newton Mitir (N·m)

12	FMGPM	0.39	0.32	-	0.27	0.24	0.21	0.43	0.36	0.31	0.27	0.24	0.22	0.19	-	-
12	FMGPL	0.61	0.45	-	0.35	0.58	0.5	0.37	0.29	0.24	0.2	0.18	0.16	0.12	-	-
16	FMGPM	0.69	0.58	-	0.49	0.43	0.38	0.69	0.58	0.5	0.44	0.4	0.36	0.3	-	-	-
16	FMGPL	0.99	0.74	-	0.59	0.99	0.86	0.65	0.52	0.43	0.37	0.32	0.28	0.23	-
20	FMGPM	-	1.05	-	0.93	0.83	0.75	1.88	1.63	1.44	1.28	1.16	1.06	0.9	0.78	0.69	0.62
20	FMGPL	-	1.26	-	1.03	2.17	1.94	1.52	1.25	1.34	1.17	1.03	0.93	0.76	0.65	0.56	0.49
25	FMGPM	-	1.76	-	1.55	1.38	1.25	2.96	2.57	2.26	2.02	1.83	1.67	1.42	1.24	1.09	0.98
25	FMGPL	-	2.11	-	1.75	3.37	3.02	2.38	1.97	2.05	1.78	1.58	1.41	1.16	0.98	0.85	0.74
32	FMGPM	-	-	6.35	-	-	5.13	5.69	4.97	4.42	3.98	3.61	3.31	2.84	248	2.2	1.98
32	FMGPL	-	-	5.95	-	-	4.89	5.11	4.51	6.34	5.79	5.33	4.93	4.29	3.78	3.38	3.04
40	FMGPM	-	-	7	-	-	5.66	6.27	5.48	4.87	4.38	3.98	3.65	3.13	2.74	2.43	2.19
40	FMGPL	-	-	6.55	-	-	5.39	5.62	4.96	6.98	6.38	5.87	5.43	4.72	4.16	3.71	3.35
50	FMGPM	-	-	13	-	-	10.8	12	10.6	9.5	8.6	7.86	7.24	6.24	5.49	4.9	4.43
50	FMGPL	-	-	9.17	-	-	7.62	9.83	8.74	11.6	10.7	9.83	9.12	7.95	7.02	6.26	5.63
63	FMGPM	-	-	14.7	-	-	12.1	13.5	11.9	10.7	9.69	8.86	8.16	7.04	6.19	5.52	4.99
63	FMGPL	-	-	10.2	-	-	8.48	11	9.74	13	11.9	11	10.2	8.84	7.8	6.94	6.24
80	FMGPM	-	-	21.9	-	-	18.6	22.9	20.5	18.6	17	15.6	14.5	12.6	11.2	10.0	9.11
80	FMGPL	-	-	15.1	-	-	23.3	22.7	20.6	18.9	17.3	16	14.8	12.9	11.3	10.0	8.94
100	FMGPM	-	-	38.8	-	-	33.5	37.5	33.8	30.9	28.4	26.2	24.4	21.4	19.1	17.2	15.7
100	FMGPL	-	-	27.1	-	-	30.6	37.9	34.6	31.8	29.3	27.2	25.3	22.1	19.5	17.3	15.5

Saxnaanta Aan Wareegga Lahayn ee Saxanka Dhammaadka

Dhexroorka Dhululubada (mm)	Saxnaanta Wareegga Θ
	10	125
Cutubka ugu badan ee la oggol yahay ee Wareegga: Newton Mitir (N·m)

Saxnaanta aan wareegga ahayn 0 ee dhammaadka dib-u-soo-noqoshada iyada oo aan la rarin waa inay ka hooseysaa qiimaha jadwalka soo socda.
12	±0.07°	±0.05°
16
20	±0.06°	±0.04°
25
32	±0.05°	±0.03°
40
50	±0.04°	±0.03°
63
80	±0.03°	±0.03°
100

Qabanqaabiyeyaasha FHFY iyo FHFZ

Guddiga Wareegga Xakamaynta Caqliga leh ee Motherboard-ka...

Golaha Guddiga Wareegga Daadinta Heerka FUS

Nooca B ee Haraaga ah ee Wareegga Hawlgalka ee Hadda...

Foorno yar oo ah nooca FMl ah oo aan lahayn bir

Taxanaha FMHS4 ee Isbarbar socda ee Furan-Xidh Nooca Pneumatic...

Shaxda Slide-ka ee Taxanaha FMXS

Ku habboonaanta Tuubada

Nooca Ku Habboon Naxaasta B

Ku habboonaanta Degdegga ah ee Nooca C (Jidhka Naxaasta ah)

Taxanaha FMGP ee khafiifka ah oo leh Usha Hagaha

Calaamadaha

Koodhka Dalabka Badeecada ee Dhammaystiran

Tilmaamaha

Stroke

Ku habboon Beddelka Birlabta

Qaab-dhismeedka Gudaha iyo Qalabka Qaybaha Ugu Muhiimsan

Tilmaamaha Dibadda

Wareegga Loo Ogol yahay ee Saxanka Dhamaadka

Saxnaanta Aan Wareegga Lahayn ee Saxanka Dhammaadka

Leave Your Message

Silsiladda Wareegga Khafiifka ah ee FCRQ2 - Nooca Rack iyo Pinion

Taxanaha Su'aalaha Badiya La Weydiiyo - Taxanaha Dhululubada Weyn

Dhululubo yar oo ah nooca FMBL Taxanaha Aluminium Alloy

Shaxda Slide-ka ee Taxanaha FMXS

Qalabka Xidhiidhka Pneumatic Piston Rod End

Taxanaha Su'aalaha Badiya La Weydiiyo - Taxanaha Istaroogga Dheer