Products Categories

FHSV Series Manual Slide Valve

LVD100 Series Universal Variable Frequency Drive

HVD Series High-voltage Variable Frequency Drive

60 Absolute value Series servo motor

40 series servo absolute value motor

HS100M1/M2-NQ level/HS100M1/M2-NQS level

FSDA Series Ultra-Thin Cylinder

product details

Installation and Use (General Purpose)

·When the load changes during operation, a cylinder with ample output force should be selected.
·Under high temperature or corrosive conditions, a corresponding high-temperature resistant or corrosion-resistant cylinder should be selected.
·In environments with high humidity, lots of dust, or presence of water droplets.oil dust, and welding slag, appropriate protective measures should be taken for the cylinder.
·Before the cylinder is connected to the pipeline, the dirt inside the pipeline must be cleared to prevent foreign objects from entering the cylinder.
·The medium used in the cylinder should be filtered through a filter element with a pore size smaller than 40um before use.
·During the operation of the cylinder, lateral loads should be avoided as much as possible to maintain the normal working life of the cylinder.
·In low-temperature environments, anti-freezing measures should be taken to prevent the water in the system from freezing.
·Because the front cover and piston of the cylinder are relatively short, the stroke generally should not be too large.
·If the cylinder is disassembled and not used for a long time, attention should be paid to surface rust prevention, dust-proof caps should be added to the intake and exhaust ports, and special attention should be paid: the front and rear covers cannot be disassembled by the user independently.

Overview of fSDA Series Products

Cylinder Theoretical Output Table

Unit: Newton (N)

Cylinder Inner Diameter	Piston Rod Outer Diameter	Mode of Operation		Pressure Area (mm²)	Air Pressure(MPa)
Cylinder Inner Diameter	Piston Rod Outer Diameter	Mode of Operation		Pressure Area (mm²)	0.1	0.2	0.3	0.4	0.5	0.6	0.7
12	6	Push Single-Acting		113.1	一	12.6	23.9	35.2	46.5	57.9	69.2
		Pull Single-Acting		84.8	一	7.0	15.4	23.9	32.4	40.9	49.4
		Double- Acting	Push Side	113.1	一	22.6	33.9	45.2	56.5	67.9	79.2
		Double- Acting	Pull Side	84.8	一	17.0	25.4	33.9	42.4	50.9	59.4
16	6	Push Single-Acting		201.1	一	20.2	40.3	60.4	80.5	100.6	120.7
		Pull Single-Acting		172.8	一	14.6	31.8	49.1	66.4	83.7	101.0
		Double- Acting	Push Side	201.1	一	40.2	60.3	80.4	100.5	120.6	140.7
		Double- Acting	Pull Side	172.8	一	34.6	51.8	69.1	86.4	103.7	121.0
20	8	Push Single-Acting		314.2	一	39.8	71.2	102.7	134.1	165.5	196.9
		Pull Single-Acting		263.9	一	29.8	56.2	82.6	108.9	135.3	161.7
		Double- Acting	Push Side	314.2	一	62.8	94.2	125.7	157.1	188.5	219.9
		Double- Acting	Pull Side	263.9	一	52.8	79.2	105.6	131.9	158.3	184.7
25	10	Push Single-Acting		490.9	一	69.7	118.8	167.8	216.9	266.0	315.1
		Pull Single-Acting		412.3	一	54.0	95.2	136.4	177.7	218.9	260.1
		Double- Acting	Push Side	490.9	一	98.2	147.3	196.3	245.4	294.5	343.6
		Double- Acting	Pull Side	412.3	一	82.5	123.7	164.9	206.2	247.4	288.6
32	12	Push Single-Acting		804.2	-	105.3	185.8	266.2	346.6	427.0	507.5
		Pull Single-Acting		691.2	一	82.7	151.8	221.0	290.1	359.2	428.3
		Double- Acting	Push Side	804.2	一	160.8	241.3	321.7	402.1	482.5	563.0
		Double- Acting	Pull Side	691.2	一	138.2	207.3	276.5	345.6	414.7	483.8

Cylinder Inner Diameter	Piston Rod Outer Diameter	Mode of Operation		Pressure Area (mm²)	Air Pressure(MPa)
Cylinder Inner Diameter	Piston Rod Outer Diameter	Mode of Operation		Pressure Area (mm²)	0.1	0.2	0.3	0.4	0.5	0.6	0.7
40	16	Push Single-Acting		1256.6	—	168.6	294.3	420.0	545.6	671.3	796.9
		Pull Single-Acting		1055.6	—	128.4	234.0	339.5	445.1	550.6	656.2
		Double- Acting	Push Side	1256.6	125.7	251.3	377.0	502.7	628.3	754.0	879.6
		Double- Acting	Pull Side	1055.6	105.6	211.1	316.7	422.2	527.8	633.3	738.9
50	20	Push Single-Acting		1963.5	89.3	285.7	482.0	678.4	874.7	1071.1	1267.4
		Pull Single-Acting		1649.3	57.9	222.9	387.8	552.7	717.7	882.6	1047.5
		Double- Acting	Push Side	1963.5	196.3	392.7	589.0	785.4	981.7	1178.1	1374.4
		Double- Acting	Pull Side	1649.3	164.9	329.9	494.8	659.7	824.7	989.6	1154.5
63	20	Push Single-Acting		3117.2	135.7	447.4	759.2	1070.9	1382.6	1694.3	2006.1
		Pull Single-Acting		2803.1	104.3	384.6	664.9	945.2	1225.5	1505.9	1786.2
		Double- Acting	Push Side	3117.2	311.7	623.4	935.2	1246.9	1558.6	1870.3	2182.1
		Double- Acting	Pull Side	2803.1	280.3	560.6	840.9	1121.2	1401.5	1681.9	1962.2
80	25	Double- Acting	Push Side	5026.5	502.7	1005.3	1508.0	2010.6	2513.3	3015.9	3518.6
80	25	Double- Acting	Pull Side	4535.7	453.6	907.1	1360.7	1814.3	2267.8	2721.4	3175.0
100	32	Double- Acting	Push Side	7854.0	785.4	1570.8	2356.2	3141.6	3927.0	4712.4	5497.8
100	32	Double- Acting	Pull Side	7049.7	705.0	1409.9	2114.9	2819.9	3524.9	4229.8	4934.8

Symbols

Product Features

·Implementing corporate standards;

·The cylinder body and front cover are fixed with a C-shaped retaining ring, the back cover is riveted with the cylinder body, and the piston and piston rod are riveted, compact and reliable;

·After the inner diameter of the cylinder body is roll-pressed, it is treated with hard oxidation,which is wear-resistant and durable.

·The piston seal adopts an asymmetric compact bidirectional sealing structure.

with oil storage function;

·Compact structure can effectively save installation space;

·The periphery of the cylinder body is equipped with sensor slots, making sensor installation convenient;

·Various specifications of cylinder types are available for selection.

Finished Product Order Code

FSDA	20	X	30			S	B	□
FSDAD	20	X	30			S	B	□
FSDAJ	20	X	30	—	30	S	B	□
↓	↓		↓		↓	↓	↓	↓
Specification Code	Cylinder Diameter		Stroke		Adjustable Stroke	Magnet Code	Piston Rod Thread Type	Thread Type Code [Note 2]
SDA:Ultra-thin cylinder(double-acting type)	1 2 1 6 20 25 32 40 50 63 80 1 00		See Stroke List for details		NA	Blank:No Magnet S:With Magnet	Blank:Internal Thread Type B:External Thread Type	Blank:PT Thread
SSA:Ultra-thin Cylinder (Single-acting Push Type)[Note 1]	1 2 1 6 20 25 32 40 50 63
STA:Ultra-thin cylinder (single-acting pull type)	1 2 1 6 20 25 32 40 50 63
SDAD:Ultra-thin cylinder (double-rod double-acting type)	1 2 1 6 20 25 32 40 50 63 80 1 00
SDAJ:Ultra-thin Cylinder(Double-rod Double-acting Adjustable Stroke Type)	1 2 1 6 20 25 32 40 50 63 80 1 00				10 20 30 40 50 75 100

FSDAT	20	X	30	—	30	S	B	□
↓	↓		↓		↓	↓	↓	↓
Specification Code	Cylinder Diameter		Stroke 1		Stroke 2[Note 3]	Magnet Code	Piston Rod Thread Type	Thread Type Code [Note 2]
FSDAT: ultra-thin cylinder (double-acting multi-position type)	12 16 20 25 32 40 50 63 80 100		See Stroke List for details		see stroke List for details	Blank:No Magnet S:With Magnet	Internal Thread Type B:External Thread Type	Blank:PT Thread
FSDAW: ultra-thin cylinder double-rod double-acting multi-position type)

[Note 1] single-acing wish the refers o the piston rod extending when the air is on the front spring is compressed and when the air is off ，the piston rod retracts to is original position under the reset force of the spring. single-acing pull type refers to the piston rod retracting when the air is on, the rear spring is compressed, and when the air is on,the piston rod extends to is original position under the reset force of the spring.

[Note 2] when the pipe joint is ofM5 thread . this code is blank.

[Note 3]stroke 1 + stroke 2 ≤ the values listed in the stroke list.

Specifications

Inner Diameter(mm)		12	16	20	25	32	40	50	63	80	100
Mode of Operation		Double-Acting Type
		Single-Acting Push Type,Single-Acting Pull Type								——
Working Medium		Air(filtered through a Filter Element with a pore size smaller than 40μm)
Operating Pressure Range	Double-Acting Type	0.15~1.0MPa(22~145psi)(1.5~10.0bar)
	Single-Acting Type	0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Guaranteed Pressure Resistance		1.5MPa(215psi)(15bar)
Operating Temperature(℃)		-20~70
Operating Speed Range(mm/s)		Double-Acting Type:30~500,Single-Acting Type:50~500
Stroke Tolerance Range		Stroke≤100 Stroke>100
Cushion Type		Bumper Pad
Pipe Diameter [Note 1]		M5×0.8				PT1/8		PT1/4		PT3/8

[Note 1] PT Thread is available for Pipe Thread

Stroke

Inner Diameter(mm)			Standard Stroke	Maximum Stroke
12 16	Double-Acting	With Magnet	5 10 15 20 25 30 35 40 45 50	50
	Double-Acting	Without Magnet	5 10 15 20 25 30 35 40 45 50 55 60	60
	Single-Acting		5 10 15 20 25 30	30
20	Double-Acting	With Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90	90
	Double-Acting	Without Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100	100
	Single-Acting		5 10 15 20 25 30	30
25 32 40 50 63	Double-Acting	With Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120	120
	Double-Acting	Without Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 130	130
	Single-Acting		5 10 15 20 25 30	30
80 100	Double-Acting	With Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120	120
80 100	Double-Acting	Without Magnet	5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 130	130

[Note] 1.Within the allowable stroke range, when the stroke > maximum stroke,it is treated as non-standard; for other special strokes, please contact our company.

2. Non-standard strokes within the maximum stroke range are modified from the previous standard stroke,and their dimensions are the same as those of the previous standard stroke cylinder. for example, a non-standard stroke cylinder with a stroke of 23 is modified from a standard cylinder with a standard stroke of 25, and its dimensions are the same

Internal Structure and Main Component Materials

No.	Name	Material
1	Rear Cover	None(Φ12,16)/Aluminum Alloy(Others)
2	Bumper Pad(Ring)	NBR
3	Piston	Brass(φ12,16)/Aluminum Alloy(Others)
4	Piston O-Ring	NBR
5	Piston Rod	S45C Hard Chrome Grinding Rod
6	Body	Aluminum Alloy

No.	Name	Material
7	Front Cover	Aluminum Alloy
8	O-Ring	NBR
9	C-shaped Retaining Ring	Spring Steel
10	Front Cover O-Ring	NBR
11	Hex Nut	Carbon Steel
12	Bushing	None(φ12~32)/Wear-Resistant Material (Others)

External Specifications

Cylinder Diameter/ Symbol	A		AB	AC		B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	PA		PB		T
Cylinder Diameter/ Symbol	Standard	With Magnet	AB	Standard	With Magnet	B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	St=5	St>5	St=5	St>5	T
12	22	32	5	17	27	25	一	6	4	M3X0.5	6	5	6.5	4.5	M5×0.8 Through Hole:Φ4.2	12	16.3	10.2	1	M5×0.8	7.5	7.5	5	5	23
16	24	34	5.5	18.5	28.5	29	-	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:Φ4.2	12	19.8	11	1.5	M5×0.8	8	8	5	5.5	28
20	25	35	5.5	19.5	29.5	34	36	8	4	M4×0.7	8	6	6.5	4.5	M5×0.8 Through Hole:Φ4.2	14	24	13	1.5	M5×0.8	8	9	5	5.5	一
25	27	37	6	21	31	40	42	10	4	M5×0.8	10	8	8.2	5.5	M6×1.0 Through Hole:Φ5.2	15	28	17	2	M5×0.8	9	9	5.5	5.5
32	31.5	41.5	7	24.5	34.5	44	50	12	4.5	M6×1.0	12	10	8.2	5.5	M6×1.0 Through Hole:φ52	16	34	22	2.5	PT1/8	9	9	6.5	9	-
40	33	43	7	26	36	52	58.5	16	4	M8×1.25	12	14	10.5	6.5	M8×1.25 Through Hole:φ6.7	20	40	28	3	PT1/8	9.5	9.5	7.5	7.5	一
50	37	47	9	28	38	62	71.5	20	5	M10×1.5	15	17	10.5	6.5	M8×1.25 Through Hole:φ6.7	25	48	38	4	PT1/4	8	10.5	8	10.5	一
63	41	51	9	32	42	75	84.5	20	5	M10×1.5	15	17	10.5	6.5	M8×1.25 Through Hole:φ6.7	25	60	40	4	PT1/4	9.5	12	9.5	11	一
80	52	62	11	41	51	94	104	25	6	M14×1.5	20	22	17	1	M12×1.75 Through Hole:φ10.4	25	74	45	5	PT3/8	11.5	14.5	11.5	14.5	-
100	63	73	12	51	61	114	124	32	7	M18×1.5	20	27	19	13	M14×2.0 Through Hole:φ12.4	30	90	55	5	PT3/8	16	20.5	16	20.5	一

External Thread Type Size

Cylinder Diameter/ Symbol	AB	D	DA	E	EA	EB	F	FA	H	M	MA
Cylinder Diameter/ Symbol	AB	D	DA	E	EA	EB	F	FA	H	M	SDAD/SDAJ	Others
12	17	6	16	M5×0.8	10	12	8	4	５	10.2	１	１
16	17.5	6	16	M5×0.8	10	12	8	4	５	11	1.5	1.5
20	20.5	8	19	M6×1.0	13	15	10	5	6	13	1.5	1.5
25	23	10	21	M8×1.25	15	17	12	6	8	17	2	２
32	25	12	22	M10×1.25	15	18	17	6	10	22	3	2.5
40	35	16	32	M14×1.5	25	28	19	8	14	28	3	３
50	37	20	33	M18×1.5	25	28	27	11	17	38	4	4
63	37	20	33	M18×1.5	25	28	27	11	17	40	4	4
80	44	25	39	M22×1.5	30	33	32	13	22	45	5	5
100	50	32	45	M26×1.5	35	38	36	13	27	55	5	5

Cylinder Number/ Symbol	A(Standard)		A(With Magnet)		AB	AC(Standard)		AC(With Magnet)		B	BA
Cylinder Number/ Symbol	St≤10	St>10	St≤10	St>10	AB	St≤10	St>10	St≤10	St>10	B	BA
12	32	42	42	52	5	27	37	37	47	25	—
16	34	44	44	54	5.5	28.5	38.5	38.5	48.5	29	—
20	35	45	45	55	5.5	29.5	39.5	39.5	49.5	34	36
25	37	47	47	57	6	31	41	41	51	40	42
32	41.5	51.5	51.5	61.5	7	34.5	44.5	44.5	54.5	44	50
40	43	53	53	63	7	36	46	46	56	52	58.5
50	47	57	57	67	9	38	48	48	58	62	71.5
63	51	61	61	71	９	42	52	52	62	75	84.5

Cylinder Number/ Symbol	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	PA	PB	T
12	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:Φ4.2	12	16.3	10.2	1	M5×0.8	7.5	5	23
16	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:φ4.2	12	19.8	11	1.5	M5×0.8	8	5.5	28
20	8	4	M4×0.7	8	6	6.5	4.5	M5×0.8 Through Hole:φ4.2	14	24	13	1.5	M5×0.8	６	5.5	一
25	10	4	M5×0.8	10	8	8.2	5.5	M6×1.0 Through Hole:φ5.2	15	28	17	2	M5×0.8	9	5.5	一
32	12	4	M6×1.0	12	10	8.2	5.5	M6×1.0 Through Hole:φ5.2	16	34	22	2.4	PT1/8	9	9	-
40	16	4	M8×1.25	12	14	10.5	6.5	M8×1.25 Through Hole:φ6.7	20	40	28	3	PT1/8	9.5	7.5	一
50	20	5	M10×1.5	15	17	10.5	6.5	M8×1.25 Through Hole:φ6.7	25	48	38	4	PT1/4	10.5	10.5	-
63	20	5	M10×1.5	15	17	10.5	6.5	M8×1.25 Through Hole:φ6.7	25	60	40	4	PT1/4	12	11	一

FSDAD

Cylinder Diameter/ Symbol	A		AB	AC		DA	E	EA		M	MA	PA
Cylinder Diameter/ Symbol	Standard	With Magnet	AB	Standard	With Magnet	DA	E	St≤10	St>10	M	MA	St=5	St >5
12	27	37	5	17	27	4	M3×0.5	6	6	10.2	1	5.5	6.3
16	29.5	39.5	5.5	18.5	28.5	4	M3×0.5	6	6	11	1.5	6.5	7.3
20	30.5	40.5	5.5	19.5	29.5	4	M4×0.7	8(6.5 for St=5)		15	1.5	7.5	7.5
25	33	43	6	21	31	4	M5×0.8	10(7 for St=5)		17	2	8	8
32	38.5	48.5	7	24.5	34.5	4	M6×1.0	8	12	22	3	8	６
40	40	50	7	26	36	4	M8×1.25	8	12	28	3	8	10
50	46	56	9	28	38	5	M10×1.5	8	15	38	4	8	10.5
63	50	60	9	32	42	5	M10×1.5	10	15	40	4	9.5	11.8
80	63	73	11	41	51	6	M14×1.5	13	20	45	5	11.5	14.5
100	75	85	12	51	61	７	M18×1.5	18	20	55	5	16	20.5

[Note]The dimensions not specified are the same as the standard type

FSDAJ

Cylinder Diameter/ Symbol	A		AB	AC		AD	Ｅ	EA		FA	M	MA	PA		R
Cylinder Diameter/ Symbol	Standard	With Magnet	AB	Standard	With Magnet	AD	Ｅ	St≤10	St>10	FA	M	MA	St=5	St>5	R
12	40	50	5	17	27	17	M3×0.5	6	6	4	10.2	1	5.5	6.3	M5×0.8
16	42.5	52.5	5.5	18.5	28.5	17	M3×0.5	6	6	4	11	1.5	6.5	7.3	M5×0.8
20	47.5	57.5	5.5	19.5	29.5	21	M4×0.7	8(6.5 for St=5)		5	15	1.5	7.5	7.5	M6×1.0
25	54	64	6	21	31	25	M5×0.8	10(7 for St=5)		6	17	2	8	8	M8×1.25
32	61.5	71.5	７	24.5	34.5	27	M6×1.0	8	12	6	22	3	8	9	M10×1.25
40	64	74	7	26	36	28	M8×1.25	8	12	7	28	3	8	10	M12×1.25
50	70	80	9	28	38	29	M10×1.5	8	15	８	38	4	8	10.5	M16×1.5
63	74	84	9	32	42	29	M10×1.5	10	15	8	40	4	9.5	11.8	M16×1.5
80	92.5	102.5	11	41	51	35.5	M14×1.5	13	20	10	45	5	11.5	14.5	M20×1.5
100	110.5	120.5	12	51	61	42.5	M18×1.5	18	20	13.5	55	5	16	20.5	M27×2.0

[Note] The dimensions not specified are the same as the standard type.

FSDAT

Cylinder Diameter/ Symbol	A		AB	AC		AD		B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	PA		PB
Cylinder Diameter/ Symbol	Standard	With Magnet	AB	Standard	With Magnet	Standard	With Magnet	B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	St＝5	St>5	St=5	St>5
12	39	59	5	34	54	17	27	25	一	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:D4.2	12	16.3	10.2	1	M5×0.8	5	5	7.5	7.5
16	42.5	62.5	5.5	37	57	18.5	28.5	29	-	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:φ4.2	12	19.8	11	1.5	M5×0.8	5	5.5	8	8
20	44.5	64.5	5.5	39	59	19.5	29.5	34	36	8	4	M4×0.7	8	6	6.5	4.5	M5×0.8 Through Hole:φ4.2	14	24	13	1.5	M5×0.8	5	5.5	8	9
25	48	68	6	42	62	21	31	40	42	10	4	M5×0.8	10	8	8.2	5.5	M6×1.0 Through Hole:φ52	15	28	17	2	M5×0.8	5.5	5.5	9	9
32	56	76	7	49	69	24.5	34.5	44	50	12	4	M6×1.0	12	10	8.2	5.5	M6×1.0 Through Hole:φ52	16	34	22	2.5	PT1/8	6.5	9	9	9
40	59	79	7	52	72	26	36	52	58.5	16	4	M8×1.25	12	14	10.5	6.5	M8×1.25Through Hole:φ6.7	20	40	28	3	PT1/8	7.5	7.5	9.5	9.5
50	65	85	9	56	76	28	38	62	71.5	20	5	M10×1.5	15	17	10.5	6.5	M8×1.25 Through Hole:6.7	25	48	38	4	PT1/4	8	10.5	8	10.5
63	73	93	9	64	84	32	42	75	84.5	20	5	M10×1.5	15	17	10.5	6.5	M8X1.25 Through Hole:φ6.7	25	60	40	4	PT1/4	9.5	11	9.5	12
80	93	113	11	82	102	41	51	94	104	25	6	M14×1.5	20	22	17	11	M12×1.75 Through Hole:φ10.4	25	74	45	5	PT3/8	11.5	14.5	11.5	14.5
100	114	134	12	102	122	51	61	114	124	32	7	M18×1.5	20	27	19	13	M14×2.0 Through Hole:φ12.4	30	90	55	5	PT3/8	16	20.5	16	20.5

FSDAW

Cylinder	A		AB	AC		AD		B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	PA		PB
Diameter/ Symbol	Standard	With Magnet	AB	Standard	With Magnet	Standard	With Magnet	B	BA	D	DA	E	EA	H	J	JA	K	KA	KB	M	MA	P	St=5	St>5	St=5	St>5
12	44	64	5	34	54	17	27	25	-	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:Φ4.2	12	16.3	10.2	1	M5×0.8	5	5	7.5	7.5
16	48	68	5.5	37	57	18.5	28.5	29	一	6	4	M3×0.5	6	5	6.5	4.5	M5×0.8 Through Hole:φ4.2	12	19.8	11	1.5	M5×0.8	5	5.5	8	8
20	50	70	5.5	39	59	19.5	29.5	34	36	8	4	M4×0.7	8	6	6.5	4.5	M5×0.8 Through Hole:Φ4.2	14	24	13	1.5l	M5×0.8	5	5.5	8	9
25	54	74	6	42	62	21	31	40	42	10	4	M5×0.8	10	8	8.2	5.5	M6×1.0 Through Hole:Φ5.2	15	28	17	2	M5×0.8	5.5	5.5	9	9
32	63	83	7	49	69	24.5	34.5	44	50	12	4	M6×1.0	12	10	8.2	5.5	M6×1.0 Through Hole:φ5.2	16	34	22	2.5	PT1/8	6.5	9	9	9
40	66	86	7	52	72	26	36	52	58.5	16	4	M8×1.25	12	14	10.5	6.5	M8×1.25 Through Hole:Φ6.7	20	40	28	3	PT1/8	7.5	7.5	9.5	9.5
50	74	94	9	56	76	28	38	62	71.5	20	5	M10×15	15	17	10.5	6.5	M8×1.25 Through Hole:Φ6.7	25	48	38	4	PT1/4	8	10.5	8	10.5
63	82	102	9	64	84	32	42	75	84.5	20	5	M10×15	15	17	10.5	6.5	M8×1.25 Through Hole:Φ6.7	25	60	40	4	PT1/4	9.5	11	9.5	12
80	104	124	11	82	102	41	51	94	104	25	6	M14×15	20	22	17	11	M12×1.75 Through Hole:φ10.4	25	74	45	5	PT3/8	11.5	14.5	11.5	14.5
100	126	146	12	102	122	51	61	114	124	32	7	M18×15	20	27	19	13	M14××2.0 Through Hole:φ12.4	30	90	55	5	PT3/8	16	20.5	16	20.5

FAT1.5-M8 Series

FDT3-M8 Series

FBT0.5-MM3 Series