Cylindri Tenuissimi Seriei FACQ
Installatio et Usus (Ad Usum Generalem)
· Cum onus inter operationem mutatur, cylindrus cum vi output ampla eligendus est.
Sub condicionibus altae temperaturae vel corrosionis, cylindrus congruens, altae temperaturae resistens vel corrosioni resistens, eligendus est.
In ambitu cum magna humiditate, multum pulveris, aut praesentia guttarum aquae, pulveris olei, et scoriarum soldadurae, congruae mensurae tutelae pro cylindro adhibendae sunt.
In ambitu temperaturae humilis, mensurae contra congelationem adhibendae sunt ne aqua in systemate congeleat.
Quia operculum anterius et piston cylindri relative brevia sunt, ictus plerumque non nimis magnus esse debet.
· Si cylindrus disiunctus est et diu non in usu est, cura adhibenda est ad rubiginem superficialem prohibendam, opercula pulveris resistentia portubus admissionis et exhaustionis addenda sunt, et peculiaris cura adhibenda est: opercula anteriora et posteriora ab usore per se disiungi non possunt.
Antequam cylindrus fistulae coniungatur, sordes intra fistulam purgandae sunt ne res externae in cylindrum ingrediantur.
Medium in cylindro adhibitum per elementum filtratorium cuius pori sunt minores quam 40 µm ante usum filtrandum est.
Dum cylindrus operatur, onera lateralia valorem permissum non excedere debent, ut vita normalis operandi cylindri servetur.
· Anulum retinaculum formae C collocandum et removendum: 1. Dum disiungis et compones, forcipe idoneo (instrumento ad anulum retinaculum formae C collocandum) utere ut eadem pars aperta sit, ne anulus retinaculum formae C evolaret et damnum corpori humano vel machinis circumstantibus inferret.
· Fac ut anulus retinens formae C in sulco anuli corporis insertus sit antequam ventilari possit.
Conspectus Productorum Seriei FACQ
Tabula Productionis Theoreticae Cylindri
| Diameter Internus Cylindri | Diameter Externus Virgae Pistoni | Modus Operationis | Area Pressionis (mm²) | Pressio Aeris (MPa) | |||||||
| 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | |||||
| Duodecim | sex | Impellere Simplex-Agens | 113.1 | — | 13.6 | 24.9 | 36.2 | 47.5 | 58.9 | 70.2 | |
| Tractio Simplex-Agens | 84.8 | — | 8.0 | 16.4 | 24.9 | 33.4 | 41.9 | 50.4 | |||
| Dupliciter Agens | Latus Impelle | 113.1 | 11.3 | 22.6 | 33.9 | 45.2 | 56.5 | 67.9 | 79.2 | ||
| Latus Trahe | 84.8 | 8.5 | 17.0 | 25.4 | 33.9 | 42.4 | 50.9 | 59.4 | |||
| XVI | VIII | Impellere Simplex-Agens | 201.1 | — | 27.0 | 47.1 | 67.2 | 87.3 | 107.4 | 127.5 | |
| Tractio Simplex-Agens | 150.8 | — | 17.0 | 32.0 | 47.1 | 62.2 | 77.3 | 92.4 | |||
| Dupliciter Agens | Latus Impelle | 201.1 | 20.1 | 40.2 | 60.3 | 80.4 | 100.5 | 120.6 | 140.7 | ||
| Latus Trahe | 150.8 | 15.1 | 30.2 | 45.2 | 60.3 | 75.4 | 90.5 | 105.6 | |||
| viginti | decem | Impellere Simplex-Agens | 314.2 | — | 36.8 | 68.2 | 99.7 | 131.1 | 162.5 | 193.9 | |
| Tractio Simplex-Agens | 235.6 | — | 21.1 | 44.7 | 68.2 | 91.8 | 115.4 | 138.9 | |||
| Dupliciter Agens | Latus Impelle | 314.2 | 31.4 | 62.8 | 94.2 | 125.7 | 157.1 | 188.5 | 219.9 | ||
| Latus Trahe | 235.6 | 23.6 | 47.1 | 70.7 | 94.2 | 117.8 | 141.4 | 164.9 | |||
| XXV | Duodecim | Impellere Simplex-Agens | 490.9 | 18.1 | 67.2 | 116.3 | 165.3 | 214.4 | 263.5 | 312.6 | |
| Tractio Simplex-Agens | 377.8 | 6.8 | 44.6 | 82.3 | 120.1 | 157.9 | 195.7 | 233.4 | |||
| Dupliciter Agens | Latus Impelle | 490.9 | 49.1 | 98.2 | 147.3 | 196.3 | 245.4 | 294.5 | 343.6 | ||
| Latus Trahe | 377.8 | 37.8 | 75.6 | 113.3 | 151.1 | 188.9 | 226.7 | 264.4 | |||
| XXXII | XVI | Impellere Simplex-Agens | 804.2 | 27.4 | 107.8 | 188.3 | 268.7 | 349.1 | 429.5 | 510.0 | |
| Tractio Simplex-Agens | 603.2 | 7.3 | 67.6 | 128.0 | 188.3 | 248.6 | 308.9 | 369.2 | |||
| Dupliciter Agens | Latus Impelle | 804.2 | 80.4 | 160.8 | 241.3 | 321.7 | 402.1 | 482.5 | 563.0 | ||
| Latus Trahe | 603.2 | 60.3 | 120.6 | 181.0 | 241.3 | 301.6 | 361.9 | 422.2 | |||
| Diameter Internus Cylindri | Diameter Externus Virgae Pistoni | Modus Operationis | Area Pressionis (mm²) | Pressio Aeris (MPa) | |||||||
| 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | |||||
| quadraginta | XVI | Impellere Simplex-Agens | 1256.6 | 44.7 | 170.3 | 296.0 | 421.7 | 547.3 | 673.0 | 798.6 | |
| Tractio Simplex-Agens | 1055.6 | 24.6 | 130.1 | 235.7 | 341.2 | 446.8 | 552.3 | 657.9 | |||
| Dupliciter Agens | Latus Impelle | 1256.6 | 125.7 | 251.3 | 377.0 | 502.7 | 628.3 | 754.0 | 879.6 | ||
| Latus Trahe | 1055.6 | 105.6 | 211.1 | 316.7 | 422.2 | 527.8 | 633.3 | 738.9 | |||
| quinquaginta | viginti | Impellere Simplex-Agens | 1963.5 | 96.3 | 292.7 | 489.0 | 685.4 | 881.7 | 1078.1 | 1274.4 | |
| Tractio Simplex-Agens | 1649.3 | 64.9 | 229.9 | 394.8 | 559.7 | 724.7 | 889.6 | 1054.5 | |||
| Dupliciter Agens | Latus Impelle | 1963.5 | 196.3 | 392.7 | 589.0 | 785.4 | 981.7 | 1178.1 | 1374.4 | ||
| Latus Trahe | 1649.3 | 164.9 | 329.9 | 494.8 | 659.7 | 824.7 | 989.6 | 1154.5 | |||
| LXIII | viginti | Impellere Simplex-Agens | 3117.2 | 141.7 | 453.4 | 765.2 | 1076.9 | 1388.6 | 1700.3 | 2012.1 | |
| Tractio Simplex-Agens | 2803.1 | 110.3 | 390.6 | 670.9 | 951.2 | 1231.5 | 1511.9 | 1792.2 | |||
| Dupliciter Agens | Latus Impelle | 3117.2 | 311.7 | 623.4 | 935.2 | 1246.9 | 1558.6 | MDCCCLXX.III | 2182.1 | ||
| Latus Trahe | 2803.1 | 280.3 | 560.6 | 840.9 | 1121.2 | 1401.5 | 1681.9 | 1962.2 | |||
| LXXX | XXV | Dupliciter Agens | Latus Impelle | 5026.5 | 502.7 | 1005.3 | 1508.0 | 2010.6 | 2513.3 | 3015.9 | 3518.6 |
| Latus Trahe | 4535.7 | 453.6 | 907.1 | 1360.7 | 1814.3 | 2267.8 | 2721.4 | 3175.0 | |||
| centum | XXXII | Dupliciter Agens | Latus Impelle | 7854.0 | 785.4 | 1570.8 | 2356.2 | 3141.6 | 3927.0 | 4712.4 | 5497.8 |
| Latus Trahe | 7049.7 | 705.0 | 1409.9 | 2114.9 | 2819.9 | 3524.9 | 4229.8 | 4934.8 | |||
| 125 | XXXII | Dupliciter Agens | Latus Impelle | 12271.8 | 1227.2 | 2454.4 | 3681.5 | 4908.7 | 6135.9 | 7363.1 | 8590.2 |
| Latus Trahe | 11467.6 | 1146.8 | 2293.5 | 3440.3 | 4587.0 | 5733.8 | 6880.6 | 8027.3 | |||
| 140 | XXXII | Dupliciter Agens | Latus Impelle | 15393.8 | 1539.4 | 3078.8 | 4618.1 | 6157.5 | 7696.9 | 9236.3 | 10775.7 |
| Latus Trahe | 14589.6 | 1459.0 | 2917.9 | 4376.9 | 5835.8 | 7294.8 | 8753.8 | 10212.7 | |||
| CLX | quadraginta | Dupliciter Agens | Latus Impelle | 20106.2 | 2010.6 | 4021.2 | 6031.9 | 8042.5 | 10053.1 | 12063.7 | 14074.3 |
| Latus Trahe | 18849.6 | MDCCCLXXXV.0 | 3769.9 | 5654.9 | 7539.8 | 9424.8 | 11309.8 | 13194.7 | |||
Symbola
Proprietates Producti
Numerus Ordinis Producti Confecti
| FACQ | viginti | X | triginta | S | B. | □ | □ | ||
| FACQD | viginti | X | triginta | S | B. | □ | □ | ||
| FACQJ | viginti | X | triginta | — | triginta | S | B. | □ | □ |
| ↓ | ↓ | ↓ | ↓ | ↓ | ↓ | ↓ | ↓ | ||
| Codex Specificationis | Diameter Cylindri | Ictus | Ictus Adaptabilis | Codicem Magnetem | Typus Fili Virgae Pistoni | Forma Fixandi | Codex Typi Fili [Nota 2] | ||
| FACQ: Cylindrus tenuissimus (typus dupliciter agens) | 1 2 1 6 20 25 32 40 50 63 80 1 00 | Vide Indicem Ictuum pro singulis | ILLUD | Vacuum: Sine Magnet S: Cum Magnet | Vacuum: Typus Fili Interni B: Typus Fili Externi | Vacuum: Nullae accessiones institutionis FA: Lamina Coniunctionis Flangis Anterioris FB: Lamina Connexionis Flangis Posterioris CB: Sedes Duplici Aure Fixans LB: Sedes Fixationis Axialis | Vacuum: Filum PT G: Filum G T: Filum NPT | ||
| FASQ: Cylindrus Tenuissimus (Genus Impulsionis Simplex) [Nota 1] | 1 2 1 6 20 25 32 40 50 63 | ||||||||
| FATQ: Cylindrus tenuissimus (typus trahens simplici effectu) | |||||||||
| FACQD: Cylindrus tenuissimus (duplici virga dupliciter agens) | 1 2 1 6 20 25 32 40 50 63 80 1 00 | Vacuum: Nullae accessiones institutionis FA: Lamina Coniunctionis Flangis Anterioris FB: Lamina Connexionis Flangis Posterioris LB: Sedes Fixationis Axialis | |||||||
| FACQJ: Cylindrus tenuissimus (virga duplicis duplicis actionis, ictus adaptabilis) | 10 20 30 40 50 75 100 |
Specificationes
| Diameter Internus (mm) | Duodecim | XVI | viginti | XXV | XXXII | quadraginta | quinquaginta | LXIII | LXXX | centum | |
| Modus Operationis | Typus Dupliciter Agens | ||||||||||
| Typus Impulsorius Simplex, Typus Trahens Simplex | _ | ||||||||||
| Medium Operans | Aer (per elementum filtratorium cum pororum magnitudine minore quam 40μm filtratus) | ||||||||||
| Ambitus Pressionis Operativae | Typus Dupliciter Agens | 0.15~1.0MPa (22~145psi) | |||||||||
| Typus Simplex-Agens | 0.2~1.0MPa (28~145psi) | ||||||||||
| Resistentia Pressionis Garantita | 1.5MPa (215psi) | ||||||||||
| Temperatura Operandi (℃) | -20~70 | ||||||||||
| Ambitus Velocitatis Operativae (mm/s) | Typus Dupliciter Agens: 30~500, Typus Singulariter Agens: 50~500 | ||||||||||
| Tolerantia Ictus mm | Ictus ≤ 100 Ictus > 100 | ||||||||||
| Typus Pulvini | Substratum Propugnaculi | ||||||||||
| Diameter Tubi [Nota 1] | M5X0.8 | PT1/8 | PT1/4 | PT3/8 | |||||||
Ictus
| Diameter Internus (mm) | Ictus Standardis | Ictus Maximus | |
| Duodecim | Dupliciter Agens | 5 10 15 20 25 30 36 40 45 50 | quinquaginta |
| Simplex Agens | 5 10 15 20 | viginti | |
| XVI | Dupliciter Agens | 5 10 15 20 25 30 35 40 45 50 55 60 | sexaginta |
| Simplex Agens | 5 10 15 20 | viginti | |
| XX XXV | Dupliciter Agens | 5 10 15 20 25 30 35 40 45 50 60 70 75 80 90 100 | centum |
| Simplex Agens | 5 10 15 20 25 30 | triginta | |
| XXXII XL L LXIII | Dupliciter Agens | 5 10 15 20 25 30 35 40 45 50 60 70 75 80 90 100 | centum |
| Simplex Agens | 5 10 15 20 25 30 | ||
| 80100 | Dupliciter Agens | 5 10 15 20 25 30 35 40 45 50 60 70 75 80 90 100 | centum |
Structura Interna et Materiae Componentes Principales
| Non. | Nomen | Materia |
| 1 | Tegmen Posterius | Nullum (φ12,16)/Mixtura Aluminii (Alia) |
| Duo | Protector Subtegminis (Anulus) | TPU(φ12~25)/NBR(Alia) |
| 3 | Piston | Aes (φ12,16)/Mixtura Aluminii (Alia) |
| quattuor | Pulvinar (Anulus) Resistens Attritioni | Nulla (φ12~32)/Materia Resistens Atteri (Alia) |
| quinque | Anulus O pistonis | NBR |
| sex | Virga Pistoni | Virga Trituratoria Chromata Dura S45C |
| ７ | Corpus | Mixtura Aluminii |
| ８ | Buxillum | Nulla (φ12~32)/Materia Resistens Atteri (Alia) |
| ６ | Anulus O | NBR |
| decem | Tegmen Frontale | Mixtura Aluminii |
| undecim | Anulus retinens formae C | Chalybs Vernalis |
| Duodecim | Anulus O-Tegminis Anterioris | NBR |
| XIII | Magnet | Neodymium Ferrum Borum (φ12~25)/Materia plastica (alia) sinterizata |
| XIV | Sedes Magnetis | Aes (φ12,16)/Mixtura Aluminii (Alia) |
Specificationes Externae
| Typus | Typus Standardis | Typus cum Magnete | AB | B. | D. | ET | ITA | H | I. | ET | K | ILLA | KB | P. | Typus Standardis | Cum Magnete | T. | ||||||||
| Diameter Cylindri/ Symbolum | A | AC | A | AC | PA | PB | PA | PB | |||||||||||||||||
| Ictus | St≤50 | St=55 | St≥60 | St≤50 | St=55 | St≥60 | |||||||||||||||||||
| Duodecim | 20.5 | unus | - | XVII | - | - | 31.5 | XXVIII | 3.5 | XXV | sex | M3×0.5 | ６ | quinque | sex | 3.5 | M4×0.7 Per Foramen:φ3.4 | undecim | 15.5 | M5×0.8 | 7.5 | quinque | IX | VII | XXII |
| XVI | XXII | XXII | XXII | 18.5 | 18.5 | 18.5 | XXXIV | 30.5 | 3.5 | XXIX | VIII | M4×0.7 | VIII | sex | sex | 3.5 | M4×0.7 Per Foramen:φ3.4 | undecim | viginti | M5×0.8 | VIII | 5.5 | 9.5 | 5.5 | XXVIII |
| viginti | XXIV | - | XXXIV | 19.5 | - | 29.5 | XXXVI | 31.5 | 4.5 | XXXVI | decem | M5×0.8 | VII | VIII | IX | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | 25.5 | M5×0.8 | IX | 5.5 | 9.5 | 5.5 | XXXVI |
| XXV | 27.5 | unus | 37.5 | 22.5 | - | 32.5 | 37.5 | 32.5 | quinque | quadraginta | Duodecim | M6×1.0 | Duodecim | decem | IX | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | XXVIII | M5×0.8 | undecim | 5.5 | undecim | 5.5 | quadraginta |
| Diameter/Symbolum Cylindri | A (Norma) | A (Cum Magnete) | AB | AC (Norma) | AC (Cum Magnete) | B. | NON | D. | ET | ||
| St≤50 | St≥60 | St≤50 | St≥60 | ||||||||
| XXXII | triginta | quadraginta | quadraginta | VII | XXIII | XXXIII | XXXIII | 45 | 49.5 | XVI | M8×1.25 |
| quadraginta | 36.5 | 46.5 | 46.5 | VII | 29.5 | 39.5 | 39.5 | 53 | 57 | XVI | M8×1.25 |
| quinquaginta | 38.5 | 48.5 | 48.5 | VIII | 30.5 | 40.5 | 40.5 | LXIV | 71 | viginti | M10×1.5 |
| LXIII | 44 | 54 | 54 | ８ | XXXVI | 46 | 46 | 77 | LXXXIV | viginti | M10×1.5 |
| LXXX | 53.5 | 63.5 | 63.5 | decem | 43.5 | 53.5 | 53.5 | 98 | 104 | XXV | M16×2.0 |
| centum | LXV | 75 | 75 | Duodecim | 53 | LXIII | LXIII | 117 | 123.5 | XXXII | M20×2.5 |
| Diameter/Symbolum Cylindri | ITA | H | I. | ET | K | ILLA | KB | P. | PA (Norma) | PA (Cum Magnete) | PB (Standard) | PB (Cum Magnete) | |
| XXXII | St=5 | XIII | XIV | IX | 5.5 | M6x1.0 Per Foramen:φ5.2 | XVII | XXXIV | PT1/8 | 7.5 | 10.5 | 6.5 | 7.5 |
| St>5 | 10.5 | 7.5 | |||||||||||
| quadraginta | XIII | XIV | IX | 5.5 | M6x1.0 Per Foramen:φ5.2 | XVII | quadraginta | PT1/8 | undecim | undecim | VIII | VIII | |
| quinquaginta | St=5 | XV | XVII | 10.5 | 6.5 | M8x1.25 Per Foramen:φ6.8 | XXII | quinquaginta | PT1/4 | IX | 10.5 | IX | 10.5 |
| St >5 | 10.5 | 10.5 | |||||||||||
| LXIII | St≥25 | XV | XVII | XIV | IX | M10x1.5 Per Foramen:φ8.5 | 28.5 | sexaginta | PT1/4 | XIV (XV) | XV | 9.5 (10.5) | 10.5 |
| St=20 | XXVII | ||||||||||||
| ST≤15 | Filum Plenum | ||||||||||||
| LXXX | viginti | XXII | XVII | undecim | M12×1.75 Per Foramen:Φ10.4 | 35.5 | 77 | PT3/8 | XVI | XVI | XIV | XIV | |
| centum | XXVI | XXVII | XVII | undecim | M12×1.75 Foramen Perficiens:φ10.4 | 35.5 | 94 | PT3/8 | viginti | viginti | 17.5 | 17.5 | |
| Diameter/Symbolum Cylindri | A (Norma) | A (Cum Magnete) | AB | A (Norma) | A (Cum Magnete) | B. | NON | D. | ET | ITA | ||||||||
| Ictus | 5/10 | XV/XX | XXV/XXX | 5/10 | XV/XX | XXV/XXX | 5/10 | XV/XX | XXV/XXX | 5/10 | XV/XX | XXV/XXX | ||||||
| Duodecim | 25.5 | 30.5 | unus | 36.5 | 41.5 | unus | 3.5 | XXII | XXVII | unus | XXXIII | XXXVIII | unus | XXV | unus | sex | M3×0.5 | sex |
| XVI | XXVII | XXXII | - | XXXIX | 44 | - | 3.5 | 23.5 | 28.5 | - | 35.5 | 40.5 | unus | XXIX | - | VIII | M4×0.7 | VIII |
| viginti | XXIX | XXXIV | XXXIX | 41 | 46 | LI | 4.5 | 24.5 | 29.5 | 34.5 | 36.5 | 41.5 | 46.5 | XXXVI | unus | decem | M5×0.8 | ７ |
| XXV | 32.5 | 37.5 | 42.5 | 42.5 | 47.5 | 52.5 | quinque | 27.5 | 32.5 | 37.5 | 37.5 | 42.5 | 47.5 | quadraginta | unus | Duodecim | M6×1.0 | Duodecim |
| XXXII | XXXV | quadraginta | 45 | 45 | quinquaginta | 55 | VII | XXVIII | XXXIII | XXXVIII | XXXVIII | 43 | 48 | 45 | 49.5 | XVI | M8×1.25 | XIII |
| quadraginta | 41.5 | 46.5 | 51.5 | 51.5 | 56.5 | 61.5 | VII | 34.5 | 39.5 | 44.5 | 44.5 | 49.5 | 54.5 | 53 | 57 | XVI | M8×1.25 | XIII |
| quinquaginta | 48.5 | 53.5 | 58.5 | 58.5 | 63.5 | 68.5 | VIII | 40.5 | 45.5 | 50.5 | 50.5 | 55.5 | 60.5 | LXIV | 71 | viginti | M10×1.5 | XV |
| LXIII | 54 | 59 | LXIV | LXIV | LXIX | 74 | VIII | 46 | LI | 56 | 56 | LXI | LXVI | 77 | LXXXIV | viginti | M10×1.5 | XV |
| Diameter/Symbolum Cylindri | H | I. | ET | K | ILLA | KB | P. | PA (Norma) | PA (Cum Magnete) | PB (Standard) | PB (Cum Magnete) | T. |
| Duodecim | quinque | sex | 3.5 | M4×0.7 Per Foramen:φ3.4 | undecim | 15.5 | M5×0.8 | 7.5 | IX | quinque | VII | XXII |
| XVI | ６ | ６ | 3.5 | M4×0.7 Per Foramen:φ3.4 | undecim | viginti | M5X0.8 | VIII | 9.5 | 5.5 | 5.5 | XXVIII |
| viginti | VIII | ９ | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | 25.5 | M5×0.8 | ９ | 9.5 | 5.5 | 5.5 | XXXVI |
| XXV | decem | ９ | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | XXVIII | M5×0.8 | undecim | undecim | 5.5 | 5.5 | quadraginta |
| XXXII | XIV | ９ | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | XXXIV | PT1/8 | 10.5 | 10.5 | 7.5 | 7.5 | unus |
| quadraginta | XIV | IX | 5.5 | M6×1.0 Per Foramen:φ5.2 | XVII | quadraginta | PT1/8 | undecim | undecim | VIII | VIII | unus |
| quinquaginta | XVII | 10.5 | 6.5 | M8×1.25 Per Foramen:φ6.8 | XXII | quinquaginta | PT1/4 | 10.5 | 10.5 | 10.5 | 10.5 | unus |
| LXIII | XVII | XIV | IX | M10×1.5 Per Foramen:Φ8.5 | 28.5 | sexaginta | PT1/4 | XV | XV | 10.5 | 10.5 | unus |
| Diameter/Symbolum Cylindri | A(ACQD) | A(ACQJ) | AB | AC(ACQD) | AC(ACQJ) | DE | ET | ITA | SED | PA | R | ||||
| Ictus | Typus Standardis | Typus cum Magnete | Typus Standardis | Typus cum Magnete | Typus Standardis | Typus cum Magnete | Typus Standardis | Typus cum Magnete | |||||||
| Duodecim | 32.2 | 39.4 | 45.2 | 52.4 | 3.5 | 25.2 | 32.4 | 25.2 | 32.4 | XVII | M3×0.5 | sex | quattuor | IX | M5×0.8 |
| XVI | XXXIII | 43 | quinquaginta | sexaginta | 3.5 | XXVI | XXXVI | XXVI | XXXVI | XXI | M4×0.7 | VIII | quinque | 9.5 | M6×1.0 |
| viginti | XXXV | 47 | 55 | LXVII | 4.5 | XXVI | XXXVIII | XXVI | XXXVIII | XXV | M5×0.8 | VII | sex | 9.5 | M8×1.25 |
| XXV | XXXIX | 49 | 60.5 | 70.5 | 5 | XXIX | XXXIX | XXIX | XXXIX | XXVII | M6×1.0 | 9.5 (St=5) / 12 (St>5) | sex | undecim | M10×1.25 |
| XXXII | 44.5 | 54.5 | 64.9 | 74.9 | VII | 30.5 | 40.5 | 30.5 | 40.5 | XXVIII | M8×1.25 | 9.5 (St ≤ 10) / 13 (St > 10) | VII | decem | M12×1.25 |
| quadraginta | 54 | LXIV | 74.5 | 84.5 | VII | quadraginta | quinquaginta | quadraginta | quinquaginta | XXVIII | M8×1.25 | 11(St≤10)/13(St>10) | VII | XIII | M12×1.25 |
| quinquaginta | 56.5 | 66.5 | 77 | LXXXVII | VIII | 40.5 | 50.5 | 40.5 | 50.5 | XXIX | M10×1.5 | 12 (St ≤ 10) / 15 (St > 10) | VIII | 13.5 | M16×1.5 |
| LXIII | 58 | LXVIII | 78.4 | 88.4 | VIII | 42 | 52 | 42 | 52 | XXIX | M10×1.5 | 12 (St ≤ 10) / 15 (St > 10) | VIII | 14.5 (St=5) / 16 (St>5) | M16X1.5 |
| LXXX | 71 | 81 | 95.8 | 105.8 | decem | LI | LXI | LI | LXI | 35.5 | M16×2.0 | 14 (St ≤ 15) / 20 (St > 15) | decem | XVI | M20×1.5 |
| centum | 84.5 | 94.5 | 114.3 | 124.3 | Duodecim | 60.5 | 70.5 | 60.5 | 70.5 | 42.5 | M20×2.5 | 20 (St ≤ 25) / 26 (St > 25) | 13.5 | XXI | M27×2.0 |
Magnitudo Typi Fili Externi
| Diameter/Symbolum Cylindri | AB | D. | ET | ITA | EB | F. | SED | H |
| Duodecim | XIV | sex | M5×0.8 | IX | decem | VIII | quattuor | quinque |
| XVI | 15.5 | VIII | M6×1.0 | decem | 11.5 | decem | quinque | sex |
| viginti | 18.5 | decem | M8×1.25 | Duodecim | 13.5 | Duodecim | sex | VIII |
| XXV | 22.5 | Duodecim | M10×1.25 | XV | XVII | XVII | sex | decem |
| XXXII | 28.5 | XVI | M14×1.5 | 20.5 | 23.5 | XIX | VIII | XIV |
| quadraginta | 28.5 | XVI | M14×1.5 | 20.5 | 23.5 | XIX | VIII | XIV |
| quinquaginta | 33.5 | viginti | M18×1.5 | XXVI | 28.5 | XXVII | undecim | XVII |
| LXIII | 33.5 | viginti | M18×1.5 | XXVI | 28.5 | XXVII | undecim | XVII |
| LXXX | 43.5 | XXV | M22×1.5 | 32.5 | 35.5 | XXXII | XIII | XXII |
| centum | 43.5 | XXXII | M26×1.5 | 32.5 | 35.5 | XXXVI | XIII | XXVII |